City of Arezzo Flag

Dimensions

Material

Printing

Finishing

Dimensions {width} x {height} cm (width x height). {proportion_description}

The print is {width} x {height} cm (width x height); the flag is {total_height} cm tall when mounted on the pole.

{material_description}

{printing_description}

{finishing_description}

Nautical Polyester

Our standard outdoor flag fabric, and the one most customers choose. 100% polyester, 115 g/m², tightly knitted with no mesh holes, so colours stay bright and the flag dries quickly after rain. Resistant to sunlight, suitable indoors and outdoors. Machine washable at 30°C.

Long Life

A heavier fabric for flags that fly all year. 100% polyester, 120 g/m², knitted with a denser, knotted weave that holds its shape and resists tearing at the hoist. Resistant to wind and sunlight — the choice when Nautical Polyester does not last long enough. Machine washable at 30°C.

Storm Flag

Our most wind-resistant fabric, for exposed places. 100% polyester, 115 g/m², woven so it cannot run or fray, with reinforced holes that let gusts through instead of pulling at the seams. Resistant to wind and sunlight. Machine washable at 30°C.

Satin

A glossy, silky fabric for indoor and ceremonial flags. 100% polyester, 125 g/m², opaque, so the design shows through to the back only faintly — a double-sided satin flag is sewn from two panels with a lining between them. For room flags, table flags and presentation. Machine washable at 30°C.

Display

A heavy fabric for decoration and banners, not for flying. 100% polyester, 220 g/m², thick and opaque, so the print is visible on the front only. Resistant to sunlight, for indoor and outdoor decoration. Machine washable at 30°C.

Black sleeve, left

The flag is cut clean and a black 100% polyester sleeve is sewn along the left side, for the pole to slide into. The open edge is machine-hemmed.

Black sleeve, right

The flag is cut clean and a black 100% polyester sleeve is sewn along the right side, for the pole to slide into. The open edge is machine-hemmed.

Printed sleeve, right

The sleeve along the right side is cut from the printed flag itself, so the design carries on over it. The open edge is machine-hemmed.

Printed sleeve, left

The sleeve along the left side is cut from the printed flag itself, so the design carries on over it. The open edge is machine-hemmed.

Sleeve 25mm, closed

A sleeve sewn along the hoist side for a 25 mm stick, closed at the top and open at the bottom, so the flag rests on the stick.

White sleeve, left

The flag is cut clean and a white 100% polyester sleeve is sewn along the left side, for the pole to slide into. The open edge is machine-hemmed.

White sleeve, right

The flag is cut clean and a white 100% polyester sleeve is sewn along the right side, for the pole to slide into. The open edge is machine-hemmed.

Sleeve 10mm, closed

A sleeve sewn along the hoist side for a 10 mm stick, closed at the top and open at the bottom, so the flag rests on the stick.

Sleeve 6mm, closed

A sleeve sewn along the hoist side for a 6 mm stick, closed at the top and open at the bottom, so the flag rests on the stick.

Sleeve 6mm, open

A sleeve sewn along the hoist side for a 6 mm stick, open at the top and at the bottom, so the stick slides through.

Strings

Two double ribbons are sewn into the hem along the hoist side, for tying the flag to a pole or a line.

Eyelets

Along the hoist side, a 40 mm polyester band is folded double and sewn with two rows of stitching.<br>{eyelet_height} in rustproof metal are set into it every 50 cm.<br>The other edges carry a double hem with two rows of stitching.<br>Every seam is sewn with high-tenacity polyester thread.

{count} eyelet

{count} eyelets

5cm top sleeve + eyelets

A 5 cm sleeve runs along the top edge for the banner bar, open at both ends.<br>Along the hoist side, a 40 mm polyester band is folded double and sewn with two rows of stitching.<br>{eyelet_height} in rustproof metal are set into it every 50 cm.<br>The other edges carry a double hem with two rows of stitching.<br>Every seam is sewn with high-tenacity polyester thread.

8cm top sleeve + eyelets

A 8 cm sleeve runs along the top edge for the banner bar, open at both ends.<br>Along the hoist side, a 40 mm polyester band is folded double and sewn with two rows of stitching.<br>{eyelet_height} in rustproof metal are set into it every 50 cm.<br>The other edges carry a double hem with two rows of stitching.<br>Every seam is sewn with high-tenacity polyester thread.

{count} carabiner

{count} carabiners

D rings

Along the hoist side, a 40 mm polyester band is folded double and sewn with two rows of stitching.<br>{eyelet_height} in corrosion-resistant synthetic material are set into it every 50 cm.<br>Two D-rings in corrosion-resistant synthetic material are sewn into the top and bottom left corners, one facing up and one facing down.<br>The other edges carry a double hem with two rows of stitching.<br>Every seam is sewn with high-tenacity polyester thread.

{count} D ring

{count} D rings

5cm top sleeve + D rings

A 5 cm sleeve runs along the top edge for the banner bar, open at both ends.<br>Along the hoist side, a 40 mm polyester band is folded double and sewn with two rows of stitching.<br>{eyelet_height} in corrosion-resistant synthetic material are set into it every 50 cm.<br>One more D-ring is sewn into the bottom left corner for the ballast.<br>The other edges carry a double hem with two rows of stitching.<br>Every seam is sewn with high-tenacity polyester thread.

8cm top sleeve + D rings

A 8 cm sleeve runs along the top edge for the banner bar, open at both ends.<br>Along the hoist side, a 40 mm polyester band is folded double and sewn with two rows of stitching.<br>{eyelet_height} in corrosion-resistant synthetic material are set into it every 50 cm.<br>One more D-ring is sewn into the bottom left corner for the ballast.<br>The other edges carry a double hem with two rows of stitching.<br>Every seam is sewn with high-tenacity polyester thread.

Carabiners

Along the hoist side, a 40 mm polyester band is folded double and sewn with two rows of stitching.<br>{eyelet_height} in corrosion-resistant synthetic material are set into it every 50 cm.<br>Two carabiners in corrosion-resistant synthetic material are sewn into the top and bottom left corners, one facing up and one facing down.<br>The other edges carry a double hem with two rows of stitching.<br>Every seam is sewn with high-tenacity polyester thread.

5cm top sleeve + carabiners

A 5 cm sleeve runs along the top edge for the banner bar, open at both ends.<br>Along the hoist side, a 40 mm polyester band is folded double and sewn with two rows of stitching.<br>{eyelet_height} in corrosion-resistant synthetic material are set into it every 50 cm.<br>One more carabiner is sewn into the bottom left corner for the ballast.<br>The other edges carry a double hem with two rows of stitching.<br>Every seam is sewn with high-tenacity polyester thread.

8cm top sleeve + carabiners

A 8 cm sleeve runs along the top edge for the banner bar, open at both ends.<br>Along the hoist side, a 40 mm polyester band is folded double and sewn with two rows of stitching.<br>{eyelet_height} in corrosion-resistant synthetic material are set into it every 50 cm.<br>One more carabiner is sewn into the bottom left corner for the ballast.<br>The other edges carry a double hem with two rows of stitching.<br>Every seam is sewn with high-tenacity polyester thread.

Along the hoist side, a 40 mm polyester band is folded double and sewn with two rows of stitching.<br>{eyelet_height} in corrosion-resistant synthetic material are set into it every 50 cm.<br>Two D-rings in corrosion-resistant synthetic material are sewn into the top and bottom left corners, one facing up and one facing down.<br>The other edges are cut clean, with no seam, which is what makes them last in the wind.<br>Every seam is sewn with high-tenacity polyester thread.

Along the hoist side, a 40 mm polyester band is folded double and sewn with two rows of stitching.<br>{eyelet_height} in corrosion-resistant synthetic material are set into it every 50 cm.<br>Two carabiners in corrosion-resistant synthetic material are sewn into the top and bottom left corners, one facing up and one facing down.<br>The other edges are cut clean, with no seam, which is what makes them last in the wind.<br>Every seam is sewn with high-tenacity polyester thread.

Along the hoist side, a 40 mm polyester band is folded double and sewn with two rows of stitching.<br>{eyelet_height} in rustproof metal are set into it every 50 cm.<br>The other edges are cut clean, with no seam, which is what makes them last in the wind.<br>Every seam is sewn with high-tenacity polyester thread.

A 5 cm sleeve runs along the top edge for the banner bar, open at both ends.<br>Along the hoist side, a 40 mm polyester band is folded double and sewn with two rows of stitching.<br>{eyelet_height} in corrosion-resistant synthetic material are set into it every 50 cm.<br>One more D-ring is sewn into the bottom left corner for the ballast.<br>The other edges are cut clean, with no seam, which is what makes them last in the wind.<br>Every seam is sewn with high-tenacity polyester thread.

A 5 cm sleeve runs along the top edge for the banner bar, open at both ends.<br>Along the hoist side, a 40 mm polyester band is folded double and sewn with two rows of stitching.<br>{eyelet_height} in corrosion-resistant synthetic material are set into it every 50 cm.<br>One more carabiner is sewn into the bottom left corner for the ballast.<br>The other edges are cut clean, with no seam, which is what makes them last in the wind.<br>Every seam is sewn with high-tenacity polyester thread.

A 5 cm sleeve runs along the top edge for the banner bar, open at both ends.<br>Along the hoist side, a 40 mm polyester band is folded double and sewn with two rows of stitching.<br>{eyelet_height} in rustproof metal are set into it every 50 cm.<br>The other edges are cut clean, with no seam, which is what makes them last in the wind.<br>Every seam is sewn with high-tenacity polyester thread.

A 8 cm sleeve runs along the top edge for the banner bar, open at both ends.<br>Along the hoist side, a 40 mm polyester band is folded double and sewn with two rows of stitching.<br>{eyelet_height} in corrosion-resistant synthetic material are set into it every 50 cm.<br>One more D-ring is sewn into the bottom left corner for the ballast.<br>The other edges are cut clean, with no seam, which is what makes them last in the wind.<br>Every seam is sewn with high-tenacity polyester thread.

A 8 cm sleeve runs along the top edge for the banner bar, open at both ends.<br>Along the hoist side, a 40 mm polyester band is folded double and sewn with two rows of stitching.<br>{eyelet_height} in corrosion-resistant synthetic material are set into it every 50 cm.<br>One more carabiner is sewn into the bottom left corner for the ballast.<br>The other edges are cut clean, with no seam, which is what makes them last in the wind.<br>Every seam is sewn with high-tenacity polyester thread.

A 8 cm sleeve runs along the top edge for the banner bar, open at both ends.<br>Along the hoist side, a 40 mm polyester band is folded double and sewn with two rows of stitching.<br>{eyelet_height} in rustproof metal are set into it every 50 cm.<br>The other edges are cut clean, with no seam, which is what makes them last in the wind.<br>Every seam is sewn with high-tenacity polyester thread.

Along the hoist side, a 40 mm polyester band is folded double and sewn with two rows of stitching.<br>Two rustproof metal eyelets are set into it, one at the top corner and one at the bottom, ready for rope, carabiners or a pole with hooks.

Along the hoist side, a 40 mm polyester band is folded double and sewn with two rows of stitching.<br>Two D-rings in corrosion-resistant synthetic material are set into it, one at the top corner and one at the bottom, for clipping the flag onto a pole or a line.

Along the hoist side, a 40 mm polyester band is folded double and sewn with two rows of stitching.<br>Two carabiners in corrosion-resistant synthetic material are set into it, one at the top corner and one at the bottom, so the flag can be hooked on and off in seconds.

Loop and rope

Along the hoist side, a 40 mm polyester band is folded double and sewn with two rows of stitching.<br>A 6 mm rope forms a loop at the top corner and hangs free for about 40 cm at the bottom, ready to tie to a pole.

Handy flags, pack of 10

A sleeve sewn along the hoist side for a 6 mm stick, open at both ends, with the 40 cm stick already fitted.<br>The other three sides are hot cut, so they cannot fray.<br>Supplied in packs of ten.

Bunting with 30 flags

Thirty flags, hot cut on every side, sewn onto a ribbon every 13 cm.<br>The line is 10 m long, with a further metre of free ribbon at each end for tying it up.

Banner

A 40 mm polyester band is folded double and sewn with two rows of stitching along all four sides.<br>Rustproof metal eyelets are set into every corner and every 100 cm between them.

1:1

Standard ratio between height and width: 1:1.

1:3

Standard ratio between height and width: 1:3.

1:4

Standard ratio between height and width: 1:4.

1:5

Standard ratio between height and width: 1:5.

1:2

Standard ratio between height and width: 1:2.

2:3

Standard ratio between height and width: 2:3.

3:4

Standard ratio between height and width: 3:4.

4:5

Standard ratio between height and width: 4:5.

5:7

Standard ratio between height and width: 5:7.

5:8

Standard ratio between height and width: 5:8.

7:10

Standard ratio between height and width: 7:10.

7:11

Standard ratio between height and width: 7:11.

8:11

Standard ratio between height and width: 8:11.

11:18

Standard ratio between height and width: 11:18.

13:15

Standard ratio between height and width: 13:15.

18:25

Standard ratio between height and width: 18:25.

28:37

Standard ratio between height and width: 28:37.

2:1

Standard ratio between height and width: 2:1.

3:1

Standard ratio between height and width: 3:1.

4:1

Standard ratio between height and width: 4:1.

5:1

Standard ratio between height and width: 5:1.

Direct Print, 90% reverse

Printed straight onto the fabric with CMYK disperse dyes made for polyester. A special coating carries the colour through the weave, so the back shows about 90% of the colour of the front. The colours are fixed with heat at 185°C, which makes them washable and slow to fade.

Direct Print, full reverse

Printed straight onto the fabric with CMYK disperse dyes made for polyester. A special coating carries the colour right through the weave, so the back looks the same as the front. The colours are fixed with heat at 185°C, which makes them washable and slow to fade.

Sublimation Print

The design is printed on paper and pressed into the fabric with heat, which gives the sharpest detail we can produce — the right choice for fine lines, small lettering and photographs. The colours become part of the fibre, so they cannot crack or peel, and the flag is washable. The back stays unprinted.