Configure the product to view the blueprint
Upload your own print file
Let a designer create your draft
Use a file from a previous order
Add to cart now, upload file later
Nautical Polyester
100% polyester fabric, 115 g/m², made with a non-mesh knotting technique, UV-resistant, and quick-drying. Ideal for indoor and outdoor use. Machine washable. It is our best-selling fabric, offering the best value for money.
Long Life
100% polyester fabric, 120 g/m², made using a knotted weaving technique for greater strength and durability. Wind- and UV-resistant, it is ideal for outdoor use where Nautical Polyester does not provide the necessary durability. Machine washable.
Storm Flag
100% polyester fabric, 115 g/m², made using a run-resistant weaving technique and featuring distinctive reinforced holes. With a structure that is particularly resistant to wind and UV rays, it is ideal for use in windy conditions. The most durable fabric in our catalog. Machine washable.
Satin
100% polyester fabric, 125 g/m², featuring the glossy finish typical of indoor ceremonial flags. Machine washable.
Display
100% polyester fabric, 220g/m², washable, UV resistant, ideal for interior or outdoor decoration and banners, non suitable for flags. Print is visible only on the front. Machine washable.
Black, Left
The flag is carefully cut, and a black 100% polyester pole pocket is sewn onto the left side. The open edge is machine-hemmed.
Black, Right
The flag is carefully cut, and a black 100% polyester pole pocket is sewn onto the right side. The open edge is machine-hemmed.
Printed right
Printed pocket on right side
Printed left
Printed pocket on left side
Pocket 25mm, closed
On the left side (hoist), a pocket for 25mm stick, closed at the top and open at the bottom.
White, Left
The flag is carefully cut, and a white 100% polyester pole pocket is sewn onto the left side. The open edge is machine-hemmed.
White, Right
The flag is carefully cut, and a white 100% polyester pole pocket is sewn onto the left right. The open edge is machine-hemmed.
Pocket 10mm, closed
On the left side (hoist), a pocket for 10mm stick, closed at the top and open at the bottom.
Pocket 6mm, closed
On the left side (hoist), a pocket for 6mm stick, closed at the top and open at the bottom.
Pocket 6mm, open
On the left side (hoist), a pocket for 6mm stick, open at the top and open at the bottom.
Strings
On the left (hoist) side two double ribbons are sewn onto the perimeter hem.
Eyelets
On the left (hoist) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. <br>Two sturdy eyelets made of corrosion-resistant metal are fitted at the top-left and bottom-left corners.
D rings
On the left (hoist) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. <br>Two D-rings made of corrosion-resistant synthetic material are fitted at the top-left and bottom-left corners.
Carabiners
On the left (hoist) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. <br>Two carabiners made of corrosion-resistant synthetic material are fitted at the top-left and bottom-left corners.
Loop and rope
On the left (hoist edge) side, a double polyester reinforcement tape (20+20 mm) is secured with double stitching. <br>In the upper left corner, a 6mm rope forms a loop; in the lower left corner, it hangs loose for about 40 cm.
Handy Flags x 10pcs
On the left side (hoist edge), a pocket for 6mm stick, open at the top and at the bottom. <br>The top, bottom, and right sides are clean cut (hot cut). <br>The flag is equipped with a 6mm stick already installed, 40cm long. <br>10pcs in a pack.
Bunting with 30 flags
30 flags clean cut on all sides are sewn on a ribbon every 13cm. <br>The bunting is 10m long + 1 m free ribbon on both sides for the installation.
Banner
On all sides a double polyester reinforcement tape (20+20 mm) is secured with double stitching. <br>Sturdy eyelets made of corrosion-resistant metal are fitted on all corners and every 100cm.
1:1
respect ratio between height and width of 1:1.
1:2
respect ratio between height and width of 1:2.
2:3
respect ratio between height and width of 2:3.
3:4
respect ratio between height and width of 3:4.
4:5
respect ratio between height and width of 4:5.
5:7
respect ratio between height and width of 5:7.
5:8
respect ratio between height and width of 5:8.
7:10
respect ratio between height and width of 7:10.
7:11
respect ratio between height and width of 7:11.
8:11
respect ratio between height and width of 8:11.
11:18
respect ratio between height and width of 11:18.
13:15
respect ratio between height and width of 13:15.
18:25
respect ratio between height and width of 18:25.
28:37
respect ratio between height and width of 28:37.
Direct Digital Print
Direct-to-fabric digital printing using CMYK disperse dyes for polyester. The use of Stylish Liquid ensures excellent results even on the reverse side, with approximately 90% color intensity. The colors are heat-set at 185°C to ensure solidity and durability. The print is washable.
Direct-to-fabric digital printing using CMYK disperse dyes for polyester. The use of Stylish Liquid ensures that the colors on the reverse side are indistinguishable from those on the front. The colors are heat-set at 185°C to ensure solidity and durability. The print is washable.
Digital Sublimatic Transfer
CMYK digital sublimation printing. The print is transferred using a heat press to ensure extremely high print resolution. The reverse side is not printed.
Dimension {width}cm by {height}cm (width x height) {proportion_description}
Printing are {width}cm by {height}cm (width x height), the flag is {total_height}cm tall when mounted on the pole.
{material_description}
{printing_description}
{finishing_description}
